Go to Top

Rivet Shelving

Durable shelving ideal for use in warehouses, offices and retail stores.

Single rivet high density shelving uses single rivet beams on intermediate levels and double rivet beams at the top and bottom for rigidity. Rivet shelving provides durable shelving that is ideal for use in warehouses, offices and retail stores.

Krost single rivet beam high density shelving is designed to provide maximum vertical clearance between shelves so that all stored items can be accessed from all sides as the side and back cross braces are not necessary for stability.

Krost Rivet Shelving is designed to provide an economical solution for the storage and display of retail, wholesale or industrial goods. Installation can be done without special tools in a minimal amount of time with just a rubber mallet. The shelves can be adjusted every 37.5 mm which allows you to custom design the unit to fit your load size. Krost Rivet Shelving can also be decked with either chipboard, plywood or steel decking.

Standard Beam Lengths

Front & Back Beam 1200 mm
Side Beam 300 mm

400 mm

500 mm

600 mm

Non-standard sizes can be manufactured on request.
Uniformly distributed load capacity on a pair of standard single or double 1200mm long beams can be up to 200 kg.

Single Rivet Beams

Primarily used as an intermediate shelf support when maximum vertical space between levels is needed.

Double Rivet Angle Beams

Used to establish unit stability and to provide shelf support on all four sides.

Double Rivet Z Step Beams

Provides increased load capacity in the longer lengths and protects decking edges.

double-rivetAngle uprights are 40mm x 40mm x 1.6mm and are manufactured in the following standard lengths:

  • 1600mm
  • 1800mm
  • 2000mm
  • 2200mm
  • 2400mm

 

 

 

Component Parts

 

component

Rivet Shelving

1. Angle Post

2. Front Beam

3. Side Beam

4. Steel or Timber Deck

 

 

Paint Process

All our products have a baked epoxy powder coated finish and pass through a 5-stage chemical cleaning process. Powder is applied to an average thickness of 55 microns as per SABS 1274-1979, type 2 method 141, prior to oven baking at 210 degrees Celsius for 15 minutes. All paint specifications are independently verified to conform to SABS standards by Corrosion Advisory Technical Services.

 

shelving


PDF Brochure

Download Rivet Shelving Brochure